Instructions for Use

Instructions for use for creating, storing, and maintaining Modoglo sugar dragee images.

In the case of an "I make it myself" type order, please carefully read and follow the points of the Guide. In the case of a "Ready-to-order" order, the User Guide provides instructions for maintaining the image.

Until the image is made, the parts must be stored at room temperature, protected from direct sunlight and radiant heat, in a moisture-free place.

Dragees and styrofoam discs must be stored out of the reach of small children.

Placing the picture on the wall:

1. Place the grid vertically on the wall so that the back of the grid is in contact with a solid surface everywhere, preferably in its final location. To do this, use the copper rings installed in the textile strips built into the grid. 
2. The load capacity of the wall support element (screw, hook, etc.) on which you hang the picture grid must be such that it can withstand the future weight of the picture, which depends on the picture size and can be found in the description of the picture.
3. Choose a location for the image that is indoor, never exposed to direct sunlight, radiant heat, humidity-free, dry, and preferably at a constant temperature between 5 and 27 degrees Celsius.
4. The image, together with the sugar dragees, represents a lot of weight. The support structure can keep it in a vertical position as intended. If the picture needs to be moved, it should be done with great care, with the coordinated and planned work of several people, during which no force will hit the frame that could break the corrugated cardboard backing under the weight of the picture.

Steps to create the image:

5. When preparing, place a soft carpet, towel, or blanket under the picture grid so that any dragees that may slip out of your hands or fall during display do not break, crack, or get damaged on the floor.
6. To insert the dragees, use the provided thread gloves or use your own. Hand moisture and heat damage the color fastness of the dressings. 
7. You should only have one dragee in your hand at a time, the one you are putting on so that the dragee that has been in it for a long time does not get wet or warm from your hand.
8. Place the dragees one by one in the picture grid, in each place the color requested by the code in the picture grid. 
9. Place the dragee on the small circular cavity so that the edge of the dragee is in circular contact with the circular rim, and then push it into the grid with a little pressure. Where the panels meet and thus the circle is divided into a smaller and a larger arc, or at the corners into two smaller and one larger arc, we recommend inserting the draze by tilting the draze into the smaller arc first and supporting it there as a pivot point press it against the edge of the larger arch and snap it into place.
10. Due to the flexibility of the picture grid, check the position of the dragees after a few hours, and if necessary, repeat this pressure for those drapes that do not fit in and stick out of the picture. 
11. Place the dragees in their place so that the manufacturer's logo is preferably on the inside, and the side of the dragee without the emblem is facing out. However, it is important to know that it does not actually affect the quality of the image if some dragees fail. The only exception to this is the yellow Modoglo logo dress placed in the corner of the picture, which by definition must be placed in the picture with the logo facing outwards.
12. The consumption and composition of the dragees are included in the description in the package, please take this into account. If you requested black and/or orange color relief, it is important that the black and orange foam board elements are not edible.

Image maintenance

13. If one of the dragees breaks, it does not affect the quality of the image, so it does not need to be replaced. However, if it still bothers you, use the removal tool to carefully remove the slide and insert another slide of the same color into the image instead. For these changes, you need to buy dragees separately.
14. If the color of one of the dragees fades, it does not affect the quality of the image and does not need to be replaced. However, if it still bothers you, use the removal tool to carefully remove the slide and either simply turn that slide over or insert another slide of the same color into the image instead. For these changes, you need to buy pads separately.
15. The color of the dragees changes over time, depending on how well you hung the picture in a place protected from light, heat, and moisture. This does not affect the enjoyment of the picture.
16. If a dragee falls out of the picture, simply put it back in place. This is usually due to the flexibility of the supporting frame. However, if it appears that the reason for this is that the slide is significantly smaller or larger than the hole, then do not use this dragee for the image, choose another one. For this reason, we include more of each dragee in the picture.
17. Orange dragees fade more in direct sunlight. If this is too disturbing, ask for orange color relief, where you can replace the orange dragees with orange foam boards.

Consumability of dragees

18. The consumption and warranty data of the dragees are indicated in the letter included in the package. Please strictly adhere to this.
19. The composition and allergen data of the dragees are indicated in the letter included in the package. Please note this strictly.
20. The product we sell primarily serves the purposes of the home decoration and recreational creation process.